The pressure is on with ESSVE’S sill plate screw!

ESSVE’S new hardened sill plate screw is produced for mounting of 45-50 mm thick sill plate/frame beams onto concrete. The surface treatment handles Climate Class 2, which is the requirement for mounting in unheated, under roof, spaces. Mount it directly in a pre-drilled hole without a plug. Its countersunk head does not restrict the mounting position of wood studs/beams.

3 truths about ESSVE’s new sill plate screw! 
Do not overpull the screw! It will not make the fixing stronger – on the contrary it’s weakened! 
The screw works well in natural rock and brick. 
The load bearing capacity increases with the mounting depth.

Properties
Dimension: 7.5×92, pre-drill with a 6mm concrete drill.
Bits: TX30. Surface treatment: 12 my zinc.
Load: Approved load in C20/25 concrete, tension load 100kg/shear load 260kg.
Article number: 105 270.
Packaging: ESSBOX 304 – 100 pc.
Stock status: Available.

1) Drill a 14 mm hole in the frame  2) Select Frame sleeve Indu Prog           3) Twist the sleeve into the hole

Now the mounting can be adjusted with a frame sleeve to become absolutely straight!